Vnc for pc - part 4

Vnc server software

Let the WAN-port router has IP-address 211.27.164.21, and the computers on the internal network - IP-address 192.168.1.10, 192.168.1.11, and 192.168.1.12.In this case, each of the computers on the internal network via Host-module configuration, you must specify a unique port.remote desktop viewing software For example, the computer 192.168.1.10 Host-module will use ports 5277 and 4277, the computer is 192.168.1.11 - Ports 5278 and 4278, while on the computer 192.168.1.12 - Ports 5279 and 4279.

Remote support tool

Then the router must be configured to carry out the following port forwarding:

211.27.164.21: 5277 -> 192.168.1.10: 5277;

211.27.164.21: 4277 -> 192.168.1.10: 4277;

211.27.164.21: 5278 -> 192.168.1.11: 5278;

211.27.164.21: 4278 -> 192.168.1.11: 4278;

211.27.164.21: 5279 -> 192.168.1.12: 5279;

211.27.164.21: 4279 -> 192.168.1.12: 4279.

But that's not all. In the last step in the settings of Admin-module for each managed computer, you must specify the same port used as the Host-configured modules.

As you see, when you want to get the Remote Control sdkcomputers in the local network protected by the router from the outside, not so simple - will have to tinker with the settings of the program.

In conclusion, we note that the demo version of Anyplace Control custom vnc remote desktom software 4.0.8.4 is valid for 30 days after installation and can support remote management of up to two PCs. Price complete version of the program depends on the number of PCs on which it is installed.In the case of a PC price is 19.99 dollars, and for an unlimited number of PCs - 1199 USD